Episode 9: Framing the Roof and Interior Walls of a Stone House Build β Summary
0:06 Radiant Heat Lines: Before pouring the concrete slab, the homeowner meticulously marked the location of radiant heat PEX lines along the walls using plans as a reference. They are now transferring these markings onto the floor to avoid drilling into the lines during wall anchoring.
2:14 Roof Top Plate Anchoring: A 2x6 top plate is anchored to the outside of the stone walls using 7-inch wedge anchors. The thick walls create a unique challenge in aligning the roof with the interior walls.
3:00 Addressing the Thick Wall Challenge: Instead of creating a stepped roof design to meet the interior walls, the homeowner plans to build a small pony wall inside to bridge the gap created by the thick stone walls.
4:11 Roof Framing Details: The roof framing involves a layered approach with 2x6s and 2x8s. The attic space will feature exposed 4x8 Douglas fir beams with tongue and groove ceiling above, allowing for insulation.
5:53 Wall Framing & Support: 2x6 studs are used for all interior walls. The homeowner plans to add extra support to the interior side of the stone walls by attaching a 2x6 with anchors and filling the space with mortar before installing drywall.
6:41 Addressing Wall Gaps: The homeowner identifies a potential 1.5-inch gap between the top of the stone wall and the bottom of the 2x8 wall framing. They plan to address this later, potentially by adding a filler piece of wood.
7:27 Room Layout: The video provides a walkthrough of the framed rooms, including two kids' bedrooms with a shared bathroom and a large main living space (approximately 830 sq ft).
8:00 Door Openings: All door openings are framed to accommodate vintage doors of varying sizes. Some doors will feature transom windows above, a traditional Victorian architectural element.
10:26 Master Suite Area: The master suite includes a bathroom, closet (5.5'x5.5'), and shower. The master bathroom will have a double vanity, and the shower is positioned on the left side of the house.
13:43 Gable End Stonework: The gable ends of the house will be clad with spacious stones (6"x4" and 8"x4") over OSB sheathing, due to the difficulty of cutting the large stones at an angle for the gable shape.
15:32 Front Porch & Steps: The front porch is 12 feet deep with unique, wrap-around steps that are 18 inches deep.
16:34 Upcoming Work: The framing crew will be installing the roof beams, followed by the homeowner routing and installing fluted 6x6 posts for the front porch.
17:22 Back Porch Plans: Full-length porches on the back of the house are postponed for now due to budget considerations, with a smaller 6x6 pad being built instead.
18:09 Interior Flooring: The interior floors will feature a herringbone pattern using "Old Fredericksburg" bricks laid on their sides. The homeowner acknowledges a potential slower heat transfer due to the air holes in the thick bricks used for radiant flooring.