This video is a detailed tutorial from Planeo demonstrating the installation of "Solution X2 in 1," a rigid core click vinyl flooring. The presenter begins by outlining the product's key features: a 7mm total thickness with integrated impact sound insulation, a unique aluminum backing for improved heat distribution over underfloor heating, and a durable 0.55mm wear layer. A major focus is on its special UV-cured "Biotech surface," highlighted for its enhanced scratch resistance and exceptional ease of cleaning.
The tutorial systematically covers the entire installation process in a small room with a gypsum-based dry screed subfloor. It details crucial steps, including subfloor preparation, the deliberate omission of a vapor barrier to prevent mold, proper use of spacers for an expansion gap, and techniques for laying the critical first rows straight using the angle-in and "dropdown" click system. A practical demonstration shows permanent marker being effortlessly wiped off the Biotech surface. The video concludes with the installation of high-quality skirting boards, offering a professional tip to cut miters at 44/46-degree angles for a tighter fit on imperfect corners.
A Step-by-Step Guide to Installing Solution X2 in 1 Click Vinyl Flooring
0:00:28 - Product Introduction: Solution X2 in 1 Vinyl: The video introduces a 7mm thick rigid vinyl flooring with integrated impact sound insulation, making it a robust all-in-one solution.
0:00:50 - Unique Aluminum Backing: A key feature is the aluminum layer on the back of the planks, designed to provide excellent and even heat distribution when installed over underfloor heating systems.
0:01:58 - Advanced "Biotech" Surface: The flooring features a UV-cured "Biotech surface" with a commercial-grade 0.55mm wear layer, making it harder than standard vinyl and exceptionally easy to clean.
0:02:33 - Dropdown Click System: The planks use an angle-in system on the long side and a "dropdown" connection on the short ends, which is tapped into place from above with a hammer.
0:04:24 - Subfloor Preparation (Dry Screed): The presenter advises against using a PE film vapor barrier on the gypsum-based dry screed subfloor to prevent potential moisture buildup and mold. The subfloor must be clean and flat before starting.
0:06:20 - Using Spacers Correctly: Proper placement of spacers is crucial to maintain an 8-10mm expansion gap. The tutorial warns that incorrect spacer use can cause the initial rows to become curved.
0:08:40 - Installation Best Practices: The presenter stresses the importance of taking extra time with the first two or three rows to ensure they are perfectly straight. A minimum joint offset of 30cm between rows is recommended for stability and aesthetics.
0:16:15 - Dropdown Installation Technique: For dropdown connections, especially on slightly uneven floors, it is important to apply downward pressure on the plank to ensure it's fully supported before tapping it into place with light blows.
0:19:16 - Easy-to-Clean Surface Demonstration: A practical test shows a permanent marker being drawn on the floor and easily wiped away with just a dry cloth, demonstrating the effectiveness and cleaning benefits of the Biotech surface.
0:23:39 - Cutting and Notching: The video demonstrates techniques for accurately measuring and cutting planks for the final row and how to notch a plank for an outside corner using a jigsaw.
0:28:31 - Pro Tip for Miter Cuts: For a cleaner finish on real-world, imperfect corners, the presenter recommends cutting inside corners at 44° and outside corners at 46° instead of a standard 45°, which helps ensure the visible edge is tightly closed.