This video tutorial demonstrates how to remotely control an oscilloscope using its built-in "e*Scope" feature, which provides a web-based interface. The guide covers two primary methods: a direct wired connection and a wireless setup. The wired method involves connecting the oscilloscope to a local network via an Ethernet cable, identifying its IP address, and accessing the control panel through a web browser. For situations where a wired connection is impractical, the tutorial details how to create a dedicated wireless network using a portable nano router configured as an access point, which connects to and is powered by the oscilloscope itself, enabling remote control from a tablet or other wireless device.
Remotely Controlling an Oscilloscope with e*Scope
0:00:09 Wired Remote Control: The video introduces the e*Scope feature, which allows full remote control of an oscilloscope using only a web browser.
0:00:19 Initial Setup (Wired): To begin, connect the oscilloscope to your network using the Ethernet port on the back. Then, navigate to the Utility > IO menu on the scope to find the IP address assigned to it.
0:00:38 Accessing the Interface: Type the oscilloscope's IP address into a web browser. This will open the LXI control screen. Click the "Instrument Control / e*Scope" link to launch a virtual replica of the scope's front panel, which you can control with your mouse.
0:01:03 Wireless Control Solution: For environments without a direct Ethernet connection or for wireless access, a portable nano router (e.g., TP-Link) can be used.
0:01:26 Setting Up the Wireless Access Point: Configure the nano router as an access point. Connect it to the oscilloscope's Ethernet port for data and use a USB cable to power the router directly from a USB port on the scope.
0:01:50 Connecting Wirelessly: Once the access point is active, connect a wireless device, such as a tablet, to its Wi-Fi network. Open a web browser on the tablet and enter the new IP address assigned to the scope by the router to gain full wireless control via the e*Scope interface.